What Are The Types Of Hinges?

- Oct 08, 2018 -

Ordinary hinge: used for cabinet doors, windows, doors, etc. Made of iron, copper and stainless steel. The disadvantage of the ordinary hinge is that it does not have the function of a spring hinge. After the hinge is installed, various beads must be installed, otherwise the wind will blow the door panel.

Pipe hinge: also called spring hinge. Mainly used for the connection of furniture door panels, it generally requires a plate thickness of 16~20 mm. The material is galvanized iron and zinc alloy. The spring hinge is equipped with an adjustment screw that adjusts the height and thickness of the plate up and down and left and right. One of its characteristics is that it can match the opening angle of the door according to the space. In addition to the general 90 degree angle, 127 degrees, 144 degrees, 165 degrees, etc. have corresponding hinges to match, so that the various doors have a corresponding degree of extension.

Door hinge: It is divided into ordinary type and bearing type, which has been mentioned in the ordinary type. The bearing type can be divided into copper and stainless steel. From the current consumption situation, the use of copper bearing hinges is more, because its style is beautiful, bright, affordable, and equipped with screws.

Bearing hinge (copper): Each of the hinges of the hinge has a one-way thrust ball bearing. The door switch is light and flexible, and is used for heavy duty doors or special steel frame steel doors.

Beveled detachment hinge: This hinge uses the weight of the hinge and the weight of the door leaf to automatically close the door. Mainly used on light doors such as wooden doors or toilets.

Cold storage door hinge: surface baking lacquer, large size made of steel plate, small size made of cast iron. Used on cold storage doors or heavy insulation doors.

Scallop hinge: The two sheets of the scalloped hinge are half thicker than the thickness of the general hinge, and are suitable for all kinds of doors and windows that need to be turned on and off.

Silent hinge: Also known as nylon washer hinge, when the door and window switch, the hinge is silent, mainly used on the doors and windows of public buildings.

Single-flag hinge: The hinge is made of stainless steel, which is rust-resistant and wear-resistant and easy to disassemble. Mostly used on double-glazed windows.

Folding window hinges: When installing, the two sheets with the mandrel should be installed on both sides of the window frame, and the two sheets without the mandrel should be installed on both sides of the window sash. One of the slotted non-mandrel negative plates shall be mounted on the side of the sash groove to allow the sash to be loaded and unloaded. Used for flipping windows on factories, warehouses, houses, public buildings, etc.

Multi-function hinge: When the opening angle is less than 75°, it has an automatic closing function. When it is in the 75°-90° angular position, it is self-stabilizing, and when it is greater than 95°, it is automatically positioned. This hinge can be used on the door instead of the ordinary hinge.

Anti-theft hinge: ordinary hinge, when the shaft is pulled out, the door leaf can be removed, the anti-theft hinge, through the self-locking action of the pin and pin hole on the two sheets of the hinge, can avoid the door leaf being unloaded, and It has anti-theft effect and is suitable for residential houses.

Spring hinge: The door leaf can be automatically closed after opening, the single spring hinge can only be opened in one direction, and the double spring hinge can be opened in both directions. Mainly used on the gates of public buildings.

Two-axis hinge: The two-axis hinge is divided into two types, which can make the door freely open, close and disassemble. Suitable for general door and window sashes.

A hinge is a mechanical device used to connect two solids and allow relative rotation between the two. The hinge may consist of a movable component or a foldable material. The hinges are mainly installed on the doors and windows, and the hinges are more installed on the cabinets. The materials are mainly divided into stainless steel hinges and iron hinges. In order to make people enjoy better, hydraulic hinges (also called damping hinges) appear. It is characterized by a buffer function when the door is closed, which minimizes the noise generated by the collision with the cabinet when the door is closed.


Related News

Related Products

  • How To Soundproof Door In Apartment
  • Upholstered Coffee Table
  • Non Sliding Patio Doors
  • Sound Proof Doors For Music Studio
  • Sound Insulated Interior Doors
  • Etching Steel AcousticTurkey Door for Hotel