Color stainless steel etched plate decoration generally uses 201 or 304 material of 0.6-2mm different thickness of the plate. According to the thickness and decorative part of the stainless steel plate, the installation method can be divided into two types: a keel with a bottom plate type and a keel without a bottom plate type. Generally, a panel having a thickness of less than 1.2 mm is generally provided with a keel type bottom plate type mounting method. Panels with a thickness greater than 1.2 mm are often provided with a keel-free bottom plate mounting method. The former is mostly used for indoor wall cylinders or moisture-proof and waterproof locations, such as the facade decoration without rain, the keel is made of wooden keel, angle steel welded keel, light steel keel. The latter is mostly used for the decoration of outdoor walls. The keel is made of angle steel welded keel and light steel keel.
The above construction process is basically the following steps:
1. Installation of the dragon skeleton: the installation of the base layer dragon skeleton, the installation process can refer to the construction technology of the wooden keel or the light steel keel, and repeatedly check the verticality and the flatness;
2. Fixed bottom plate: The bottom plate generally adopts 5-12mm thick plywood. The construction method and requirements are the same as ordinary wooden cover panel construction. However, when the keel is light steel keel or angle steel keel, first drill the hole on the keel with electric drill. , using a self-tapping screw to fix the bottom plate to the keel, and the screw head cannot be higher than the surface of the bottom plate;
3, fixed panel: color stainless steel plate before installation according to the design size and modeling requirements to make the finished shape. When there is a bottom plate, apply the universal glue on the back of the bottom plate and the stainless steel respectively, and gently paste the prepared stainless steel plate on the bottom plate; when there is no bottom plate, fix the pre-machined stainless steel plate on the light steel keel with stainless steel screws or Solder directly on the keel;
4, the edge: edge treatment, in the interface between the stainless steel or the corners of the corner, the angle of the corner is filled with sealing glue, stainless steel tank and other methods to close the edge, decorative treatment.
5. Wipe the surface of the colored stainless steel with a soft dry cloth and tear off the protective film on the surface.