Slide Rail Installation

- Oct 10, 2018 -

How to install the drawer slide

1. Fix the five plates of the drawer first, screw the screws, the drawer panel has the card slot, and there are two small holes in the middle for the installation handle.

2, the installation of the drawer slide rail first need to disassemble the rail, narrowly installed on the side panel of the drawer, wide installed on the cabinet, when installed, under the flat drawer side panel below the slide rail, in front of the front flat drawer side panel. Everyone needs to distinguish between before and after.

3. Install the cabinet. First screw the white plastic hole on the side panel of the cabinet, then install the wide rail removed on the top. One slide rail is fixed one by one with two small screws. Both sides of the cabinet must be installed and fixed.

Please pay attention when installing

1. Please ensure that there is a gap of 13mm between the drawer and the cabinet.

2. Fully stretch the three-section slide rails, and have a black buckle on the reverse side of the inner rail. Pressing to the left side can separate the inner rails;

3. Fix the outer rail and the middle rail on both sides of the drawer;

4. Fix the inner rail on both sides of the cabinet;

5. Lift the drawer and align the middle rail to the inner rail and slide it into the end.


Related News

Related Products

  • Small Modern Coffee Table
  • Solid Wood Front Doors
  • French Garden Doors
  • Soundproof Patio Doors
  • Sound Resistant Doors
  • Soundproof Interior Door