As a late-stage process for processing wood doors in a factory, its advantages and disadvantages directly affect the final use effect. At the same time, the paint cost is also one of the largest parts of the wooden door.
The types of paint are roughly divided into phenolic paint, alkyd paint, polyurethane paint, nitro paint, polyester paint, and PU paint. Among them, phenolic paints and alkyd paints are basically eliminated during the decoration due to poor texture and adhesion of paint films, and a large number of urethane paints, polyester paints, and PU paints used on high-grade furniture are used in large quantities. Nitro-lacquer is relatively simple to use and suitable for manual operation. It is used by most hand-decorated wood. However, the paint film is thin and feels bad. The effect is not ideal.
Due to the problems of cost processing methods and equipment, 90% of packaged wooden doors on the market use polyester paint and a few manufacturers use PU paint. In general, polyester paint and PU paint have to look for color, three steps and two sides and other six processes, some brands increase the curing and waxing process.
Therefore, in the selection of wooden doors, paint is one of the factors that must be considered. It directly affects the texture, feel, moisture, environmental protection, durability, resistance to yellowing and other issues.